E-type gravel crusher is a kind of gravel crusher. The motor drives the belt and pulley to move the jaw up and down through the eccentric axis. When the jaw moves up, the angle between the elbow plate and the jaw becomes larger, thus pushing the jaw plate
Characteristics: a. Before-and-after static pressure difference of materials forms low pressure conveying between materials and air. Meaning less noise and less use of air. b. Long conveying distance and high vertical height. Capacity: 100kg/h~25t/h Verti
Reverse osmosis: in natural osmosis, water molecules migrate from the low concentration side ofa solution through a semi-permeable membrane to a high concentration solution.When we impose foreign pressure on surface water and groundwater, water molecules
KDF WD series single phase direct driven outer rotor centrifugal fan are made of scroll, impeller and support panel, motor. The volume is from 250 m³/h to 3,040 m³/h. This is external rotor motor type with single phase.
Introduction: The FL dispersing machine is suitable for the coating, dyestuff, pigment, printing ink and adhesive industries to mix, dissolve and disperse the liquid and liquid-solid materials. In stirring and dispersing the materials, there are only a li
PRE Web Steering Guide System makes precise correction on materials via a long entrance span. This innovative web guide units corrects lateral errors in the web. Single or dual rolls are available with a maximum allowable tension of 5000N.
KDF WS series three phase direct driven outer rotor centrifugal fan are newly developed and manufactured products with internationally advanced technology of similar products introduced by the company with volume ranging from 600 m³/h to 20,000 m³/h.
Characteristics： a. With simple structure and less possibility of failure. b. Stable air-material ratio and effective energy conservation. Capacity：50kg/h~ 30t/h Vertical height：≤50m Distance：≤500m Low pressure：-0.9bar~ +0.9bar Low speed：0.5~22m/s WELLSUN
Starting of E-type gravel crusher1. After inspection, it is proved that the machine and transmission parts are in normal condition before starting.2. The machine is only allowed to start without load.3. After starting, if abnormal conditions are found, st
Condition:NewType:Drying OvenPlace of Origin:Henan, China (Mainland)Voltage:customer madePower(W):30kwDimension(L*W*H):11000*1200*2200mmCertification:ISO/CEWarranty:1YEARName:nut drying machineDehydration rate:32-35kg/hr
The process of blow molding machine is using preformsto make plastic bottles. The preforms are produced with the necks of the bottles, including threads on one end. The preforms are heated typically by infrared heater, then blown using high-pressure air i
radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is pref
The silica gel desiccant for shipping containers is mainly used in shipping containers to absorb water vapor during marine transportation or storage and prevent the goods from being damp, moldy, rusted, and oxidized.